Reconsider ... ?

After having spoken with my friend Ally I feel a little differently about the role and responsibility of Midtown S&W mentioned in the last post.  Ally said that the responsibility for this should fall squarely on the shoulders of the parent/s that left their child unattended in a place where other adults had access to her.  I still think the gym should have a policy that no children should ever be left unsupervised in any part of the gym and the day care room etc. should be locked when there are no staff in it.  BUT I agree with Ally about the root of responsibility being in the parents not the gym.  The gym screwed up but not in a neglectful way in that they failed to provide supervision but in that they inadvertently provided an environment where this sort of thing could happen; a place where children get left basically unattended but there is a general feeling of safety. (in a gym, with lots of members/staff around etc).  Lesson learned.  I just hope that little girl gets what she needs from her parents and gets therapy and is the type of person (this most especially) that can recover and sort it out and move on to have healthy, happy romantic and sexual relationships when she grows up.

6 Year Old Molested at the Gym

WTF?  No shit.  Midtown Sports and Wellness (of which there are three in ABQ) is a big, well equipped gym near my home in ABQ.  They have day care (2 hour maximum) during the day and I took advantage this winter.  Gracie loves going and playing with the other kids and I get to blow off some steam and not turn into a lump of fat.  I stopped going a month ago cuz it warmed up enough that I can do things outside: my preference.  Yesterday my new friend Dan told that a six year old was molested/raped at Midtown S&W.

Usually I am pretty hard to bump out of groove.  Life is a winding road, just like the song says but this bumped me.  Dan's daughter, my daughter, lots of peoples daughters use the day care at MSW.  This happened when the day care room was not staffed but ... who fucking cares.  Unsupervised young kids at a gym while Mom or Dad are off working out?  Woman on the cleaning staff has a 20 year old son that is a member of the gym.  He spent a little time with the girl helping her get a video started and then went back and molested her: nasty details like holding his hand over her mouth and telling her he would hurt her if she yelled etc.  She left the room crying after he left and told staff what had happened.  Cops caught up with him and he freely admitted to having a problem 'touching little kids'.  WTF?

"Day Care".  Most day cares care for kids whose parents are not on site.  These day cares be licensed and inspected by a governing body.  MSW's day care is exempt because parents are still on site.  So the gym did not have any guidelines that they were required to follow and I think this is how this situation came about.  After gym day care staff has left people still bring in their kids (albeit older than my 17 month old daughter but still young) and let them hang out, watch videos, play with the toys and all of this is unsupervised.  I think adults know that the kids are doing this but noone is specifically dedicated to the task.

I googled it and found all sorts of hateful, vengeful chatter on various 'white power' and 'gun nut' sites.  Their focus was on the fact that this 20 year old was an illegal alien (and this of course explains why he did something so depraved and damaging to this girl).  I just don't get it ... the racist angle.  As though a US citizen would never do this sort of thing ... ?  Stupid people are everywhere I guess.  One guy on a 'white power' site went into grisly detail how he would torture and kill this illegal alien child molester: cutting off his fingers with tin snips etc.  WTF? How is that any different and somehow justifiable than molesting a six year old?  He had it all planned out in numbered steps.  Totally twisted.

Dan, the new friend that told me about the situation at MSW, started in about how what he would do if this happened to his daughter.  I told him I didn't want to hear it and explained that if you truly wanted to get away with killing someone having witnesses to your 'plan' before the crime was probably something you'd want to avoid.  I said "Don't tell anyone anything."  Silly really, but ... god forbid, you never know.

Here would be the appropriate spot to get on my 'irate, vengeful, soapbox' and detail my plan to rid the world of one more predator BUT : my official perspective on this is; I don't need to spend that amount of energy and focus on something so completely negative and poisonous.  The other side of the revenge coin would be love and healing for the injured child.  That's not going to happen if I am plotting a murder is it?

The world is a really fucked up place.  Shit like this sometimes intrudes into my tight, white, safe little world and while it is a distinctly scary reminder I appreciate it for what it is.  Most of the world is not safe and wonderful.  I think that in spite of this sort of heinous shit it is possible to raise kids without teaching them to be eternally afraid.  Nuf said.

MOAB

You have probably heard of Moab, Utah.  Most people have if they like the outdoors.  I heard about it about twenty years ago after my friends Jamie and Danielle went there for a trip.  So they rode the Slickrock Trail on Rigids (a bike with no suspension).  There was really no other choice in those days so it wasn't old school or hard core then but riding Moab today is a different story.  Full suspension is the only way to fly and you are considered hardcore if you ride it on a hardtail (bike with only front suspension).  Of course the distance you can cover on a nice XC (cross country) full suspension bike and the speed you can descend has increased since the old days.  Regardless of what you ride Moab is a punishing place and it does not suffer ill maintained equipment or stupid behavior.  Moab is also an almost ridiculously beautiful place that will boggle your mind the first time you see it.  Views so vast and wide and full of images of great power that you almost can't accept that it is real.  Thousand foot drops to distant valley floors in the midst of which great towers of red rock rise up and up and up with the Colorado River pushing through it's hard won canyon like a great majestic snake.  Difficult riding, punishing extended descents, remote (and therefore dangerous just for how far away from help you are) locations all make for serious fun.  No matter where you stop you are in for at least a decent view.  Sometimes you just gawk and wish you had wings.

I drove up with my next door neighbor and riding buddy Chris and upon arrival he realized that the allergies that had been plaguing him badly were really a nasty head cold.  He was awake coughing and sneezing the first night and ... so was I, not mine but his.  I know he felt pretty bad with the cold and pretty bad because here he was in riding nirvana with a brand new amazing full suspension bike and he was sick.  He rode the first day and showed considerable pluck but there was no hiding he was sick.  We shuttled up to Porcupine Rim and it was just great.  I tore it up on my Specialized Enduro which was basically built for this type of trail.  It was an epic ride down to the river from the rim.  The night following our first ride was worse then the first and Chris was in a major hurt.  He called his girlfriend in ABQ and she drove the 350 miles north to get him and then they drove home!  Wow.  I stayed on and rode for two more days and met some very nice folks from Fort Collins, Co. who were kind enough to invite me to dinner and ride with me the day following so the trip was very satisfying and I hope to return before we leave NM.

Job Done

I mentioned earlier that I had done 1/2 the job replacing the trailing arm bushings and painting  and cleaning up the rear brake drums. Well, I found the time and got it all done and let me tell you, it feels pretty darn good.  In fact, I had to pull the axles again after replacing the wheel bearings because like an idiot I reused the old oil seals (which were both all boogered up) and they both leaked quite a bit since the job. So, with a trip to Moab coming up I knew I had to replace the seals.  It went well, I got the axles pulled quickly and only had one brass pinion gear shim fall out which was easy putting back.

 The bitch was finding oil seals.  The whole reason I didn't have new seals was O'Reilly's carried the bearing but not the seal (which makes no sense) I went to Napa and they had to look all over the city and found 1 set and it took me over two hours just to find the part and get it home. I have to say that all auto parts stores are NOT created equal.  AutoZone is OK if you need something a retarded monkey could find. O'Reilly's is better but ... I still get the feeling that half the time it is just a job and they could care less. Napa seems to be focused on getting the parts you need and they job out to all sorts of automotive vendors who need better service and knowledge base then a store that primarily caters to the clueless auto enthusiast looking for a Betty Boop air freshener.  Once installed the oil seals seem to work fine and the brakes work as well as drum brakes work. I did drive to Moab and I had no problems whatsoever in 900 miles of driving.

Boogered Up Electrics

 The wiring in this truck is 46 years old.  46 years.  Wow.  I still can't get my head around it.  Well, to be clear, the thing I can't get my head around is that this truck runs at all.  Every time I look under the back end all I see is the loose end of another cut wire or the patented 'redneck splice' (the bare ends of two wires loosely twisted together and hanging on by a just a single strand). Another of my goals is to get the wiring replaced and updated and to do it right.  Wiring and electrical stuff is a challenge but I know that if I take my time and find good vendors I can make this truck work better than it did brand new.  Full wiring harness replacement from Chevy Duty is around $450.  In addition to this I found a really solid looking splicing technology that encases but joints in plastic for bomber, waterproof splices. I also found reference to a guy in SoCal that has developed a modification for many old vehicles that improves the performance of the ignition/charging system for not much money and after two months of calling (I even wrote a letter) I got Mark from MAD Electrical on the phone and ordered a 'New System' package.  Once I get all the pieces of the system I can start replacing it section by section.  

Trimmings and such.

MOST of the work I have done on the truck has been based on my entirely 'function first' perspective. My gal Erin operates from the other end of the spectrum and does things from an 'aesthetics first' perpective which makes for a nice looking house and some good arguments.  However,  I have added a few things to the truck that have some aesthetic value although in my mind they are there primarily for what they do.

Here you see what I call the 'eyelids' on the windows.  Goofy right? Well, as small as they are they actually do a good job keeping the sun out of your face and in New Mexico this is no small thing.  I don't want to tint the windows because there is something I just don't like about not being able to see who is in a vehicle.

The other aesthetic addition are the arm rests.  This truck came with only one sun visor and only one arm rest which was missing when I bought it.  Just the bunged up holes in the panel where it used to be mounted. In fact the holes aren't in the right place so I don't think the missing arm rest was stock either.  Base models were basic.  These arm rests are actually from the earlier Chevy truck series but they look OK so I put in 2 of them.  As it turns out there are special square holes in the interior panel to which these can attach putting the stress of pulling the door closed on the actual door and not just the access panel you can see here.  I took extra care to see that these stayed in place and didn't pull out or loosen or clang using foam dampeners and big washers and threadlocker.  We shall see if it holds but it feels pretty F-ing solid.

Cheap Pickup Bike Rack

I am a firm believer in spending the money on really good gear WHEN IT IS NECESSARY. That said I am always looking for ways to get that gear for less OR build that gear for WAY less.  I like to build stuff and have through the years built my own kayak and bike racks because Thule and Yakima while a good product have hoodwinked the public into thinking they have to spend LOTS of money on a rack.  This just isn't the case in spite of what they tell you at the store.

For instance: If you want to put 2 (just two) kayaks on the roof of your whatever the conventional way to do this is to purchase a base rack ($300) and then a individual saddle system for EACH boat ($100 EACH).  OK, now we are up to $500.  That is just frigging stupid.  All we need to do is carry the boats.  The whole point is to paddle the boats in wild, beautiful and exotic places, the rack is incidental for Pete's sake.  $500?  I bought a kayak stacker for $70 (this was at least 10 years ago) and built a rack using wood, aluminum angle, foam, rope, screws and what have you for a TOTAL of $100.  My rack would carry1- 6 boats and was DEAD solid.  I used some form of this type of rack with the SAME kayak stacker for over 10 years without a problem.  I carried boats thousands of miles from Vermont to Georgia and back, I carried a full rack for hundreds of miles.  White water boats, sea kayaks, lumber, whatever.  Don't believe the hype.  Build your own.

So the latest rack is for carrying bicycles in a pickup truck.  You can go the same route for bicycles and buy a Thule or Yakima base rack and individual attachments for each bike but much the same as kayak racks it is going to cost you.  So, years ago I worked at a wonderful little used bike shop in Burlington, Vermont called Planetary Cycles.  There they had boxes of used and old bike stuff collected through the ages and I built a bike from parts that I am still riding today.  I also found all sorts of giblets of future use (GOFU) one of which was a cheap aluminum high flange hub.  I always intended to build it into a wheel but look what I did instead.

The rest of the rack is pretty straightforward stuff: one board of reasonable strength (plywood is probably best) I used 1/2 inch plywood.  Some way to attach the fork to the board. Old hubs if you can find them or the standard fork mounting block which are readily available and NOT expensive ranging from $15 to $25 each.  Most bike racks on vehicles are fixed and this makes some sense for security etc.  However, this one I wanted to be able to use in any truck or SUV so I fixed some closed cell foam to the underside to prevent it from sliding around and it works great. I actually took it for a test drive with 1 bike (more bikes would be more stable) on the interstate at 55 mph, round corners quickly and city potholes: the board did not move and the rear wheel of the bike did not move.    There is no reason that the rack be bolted down assuming you are driving around in a normal manner.  I think I would NOT want the rack fixed if there were an accident or rollover. Total investment: $40  HA!!