Winter Cycling

Wednesday, May 22, 2013

Circling The Drain

In nursing there is an expression that is often reduced to the acronym CTD: circling the drain.  Not an acronym that would get used in the patient record but one that gets lots of use in behind the scenes conversation. It is that period of unknown length that a patient is still alive, perhaps still functioning cognitively but has clinically reached the end of the road. Sometimes patients CTD and get well but not often. What the hell is my point?

I feel I have reached this point. I am CTD, not clinically, not physically but in a life sense.  February 2nd I quit my job at the Dane County Jail and since then I have with some motivation at first looked for work. In the four months out of work I have not had one interview. I have applied for nursing positions that I wanted and nursing postions that I didn't want but knew would be better than the job in the jail. I have applied for jobs in outdoor industry retail and nothing.  The last two months I have been clinically depressed. I know I am not a shrink but I am not an idiot and I know the symptoms: listless, frequent and persistent crying jags, feelings of hoplessness, physical pain, aches etc., lack of confidence, inability to take criticism or deal well with bumps in the road, refusals, failures, feelings of isolation and isolation behaviour. I have every one of these symptoms. I don't know what to do and I DO nothing. I numb myself and push the situation away with lots of TV and video games. I am not doing any drugs, I drink the occasional beer but generally avoid alcohol like the plague-it only makes things worse. My diet is OK. Not great but not terrible either. I am sleeping OK.  I am not getting enough exercise but I am getting some and always feel better when I follow thru but this does not mean that I always follow thru.

I am caught between the knowledge, which I have had since long before I moved here, that I am living in a place where I despise living. Some people don't seem to care much where they live as far as physical geography: mountains, ocean, plains, temperature, humidity etc. As long as they have some connection to people or pets or work that is rewarding they manage. I wish I was one of these people ... fervently wish but I am not and as the saying goes 'a leopard cannot change his spots'. I have always lived in a place where I was able to disappear into some sort of wild place, be it mountains or oceans, some wilderness where I got to connect to the power of earth and get away from the human emotional soup that surrounds most of us. There are no wild places here, none. There are little pockets here and there but nothing on the scale necessary to remove me from the human culture, New Mexico, Maine, California, Georgia, Vermont all had wild places I could disappear into, if only for a couple of hours, and regain perspective and recharge. That's only half of it. The other half of what kept me going my entire adult life was friends and family. I have no community here, I have no friends here, I have no family here.  I have been here for over 18 months. I have been back to Vermont twice since I moved to Wisconsin. It isn't enough. I am so desperately starved for the basic currency of close human relationships it is hard to admit. I am well past the smooth-over pleasantries like 'it's not so bad', or 'I am a little lonely but I am going OK'. The only person who loves me here is my wonderful 4 year old daughter. This is in itself is something I worry about because I don't want that on my daughter. Both her parents rely on her far too much emotionally. I want to be solid, creative, solvent, happy enough to have some emotional reserve. I do not have this, I am paper thin and my daughter knows it. I work very hard to be consistent with her and maintain the rituals that children thrive on but I know it is only the best I can do in a bad situation. I feel guilty about NOT creating something solid someone and having a kid with them instead of this perpetual war of distrust and resentment that I am embroiled in with Gracie's Mom. I look at my friend Stu's life and how he raised his kids and while I doubt I could have done it the way he did it I know I could have been somewhere a long way from what I have created here.  This is a terrible truth that eats at me every day.  I feel that my daughter deserves better and yet I selfishly sit on the couch and watch one stupid program after another instead of beating the 'streets' for a job.

Over five years I was sick with Hodgkin's Disease. That was hell but looking back at it from this situation I was happier then than now. I am older now and I am not bouncing back like I did. I am far more alone now than I was during that time and that is the crucial difference. I never thought I would say that but here I am saying it.

The cruel Catch-22 is that I could get a job in Vermont or New Mexico where I could live with all my friends and have a job that was challenging and not entirely soul crushing except for one thing: Gracie is too young to be apart from either parent for this to work. It will be years before a long distance schedule will work. So I stay which has all the aforementioned problems.  My Mom said "It is easier to understand now why men leave." referring to Gracie's Mom's attitude and behaviour toward me. It is hard enough to raise a kid when the parents are living two separate lives that the child hops back and forth to and from. I live with the knowledge that Erin would if she could prevent me from seeing Gracie ever again. She pays lip service to the importance of the father being involved but she does not believe. The first chance she got she prevented me from seeing Gracie for six weeks based on opportunistically interpreted advice from a psychologist. Erin continues to pay lip service to the kind of relationship that the parent counselor recommends but it's a facade erected for his benefit.

CTD. I was saying "I don't know how long I can do this". Now, even this feels hopelessly optimistic. Now the common phrase that best fits is 'It's only a matter of time.'  

Friday, June 15, 2012

Life just keeps getting stranger.  I have always been fairly self directed.  After the last few years I find myself living in a part of the country I would never considered living working in a job I would never consider working three years ago.  I have always understood that many people on this planet including many people in this culture have not had the freedom to do what they wanted like I have in my life. I also understand that I should not compare what I perceive as their level of freedom to mine and make a judgment about how happy they are in their lives.  I know it just doesn't work that way and I am not the yardstick for what kind of life is good or bad, happy or sad, fulfilling etc. The situation I am in right now is very difficult for me.  I don't know how other people in different lives might perceive it but I find it very difficult.  I am caught in a Catch-22: I am living in a place that I do not want to be.  The only reason I am here is my 3 year old daughter.  I am really struggling to invest in spite of the fact that I know I would be happier if I did.  I have no friends here.  Not one.  I want friends and I know I will be happier if I have them yet I resist.  There is something about the human culture here that annoys the fuck out of me.  I have been trying to get out and meet people but in six months I have really had no luck.  I have been out of work and feeling outnumbered and outgunned and as a result I am also feeling depressed and this doesn't make me friendlier.  Excuses?  Maybe.  Certainly reasons.

I am hoping that I can settle in to my job and do it well.  It is a strange twist that I feel imprisoned living here in a geographical place I do not like in a human culture I do not like and I have found a job that is actually in a jail.  There is some twisted irony lurking therein.  Every week I find myself thinking "I don't know how much longer I can do this." But I have to keep going.  I know that if I were to leave here without Gracie I would struggle even more than I am now. 

I feel sorry for Gracie.  Perhaps I feel too sorry.  A 3 year old should not have to be responsible for so much.  Between her mother and I she is torn between two people who love her very much and at least from my perspective rely on her too much for love and a feeling of worth and value.  I know I am too dependent on my little daughter because of the dearth of other people in my life that I can touch and talk to, another reason to keep going but I am discouraged and tired. 

Tuesday, January 17, 2012

A New Bike!!!

I have to say that just love new bikes, which includes used bikes new to me.  I just bought my first new bike since 2009 so it has been two years. I have six bikes now and the only one I would ride in the winter salt of Wisconsin is the 45 pound tank of a cruiser I call Elvis that I built about 17 years ago. All the others are just too nice to accelerate the corrosion factor with daily salt spatterings. So, I bought a new bike to ride in the salt which does not really make sense except that it is designed for it and the only steel on the bike is hardware and the fender stabilizers.  I got a new Globe Daily 1. Globe is an offshoot of Specialized and this line is being marketed worldwide which means that is not meant (or styled) for just the USA market. This means that (at least to me) it is far MORE appealing aesthetically.  This bike is very simply styled which generally appeals to me. It is a single speed with a flip/flop hub which is threaded for a bmx freewheel on one side and a fixed gear/lock ring on the other. I have had a very nice Pinarello Bassano track bike since long before the fixed gear craze hit but it is a beautiful bike that I am not going to subject to the rigors of salt and daily winter commuting so I have gone trendy with this little single speed.  I discovered today that there are lots of choices available for the bmx freewheel which is good because this bike was not spec-ed with the 18T freewheel that Globe/SBC lists but a 16T freewheel which is too tall for me in Madison which is hilly. I discovered that there are dual cogged bmx style freewheels available for this type of hub which means that potentially this bike would be a three speed, although you would have to remove the rear wheel and flip it to the fixed gear to utilized all three.  I like this.  So for city winter riding where the combination of surface, cold, clothing and tires create more resistance you could run a relatively lower 'gain ratio', without too much trouble you could loosen the wheel but not remove it and switch to a slightly higher gain ratio (2 teeth) on the freewheel and if you really wanted to go where a fixed gear would serve you remove the wheel and flip it for the fixed gear. So, three speeds on hub that is still way lighter than any internal three speed hub or derailleur/ multigear freewheel setup not to mention all the complexity and weight of the control apparatus (shifters, cable/housing etc.).  I know this level of detail is geeky and I don't care. My blog, nobody reads it anyway. 

I have to give props to Specialized/Globe now so read on.  In the early nineties I worked at Wheelsmith in Palo Alto CA and the store carried Specialized. Since then I have been consistently impressed with the quality of engineering, quality of build and customer service. I have an all mountain bike by SBC: the Enduro and it is amazing. So the Daily 1 is in it's own way just as well thought out and executed. I know I will like this bike more as I ride it. My first bike with a basket.

Thursday, December 22, 2011

Safe, Flat, and Bland.


So here I am in the land of 'fromage l'orange': Wisconsin. I was in New Mexico and while I might not have stayed there forever I did LOVE the state. Vast, varied, vicious and sometimes voluptuous. I liked NM for all the reasons that I am struggling with Wisconsin. NM is extreme. It is still the Wild, Wild, West and you have to stay awake some of the time if you want to stay alive. The traffic is nuts but one thing they don't have in NM is lots of white folks driving around looking for an excuse to self righteously honk the horn and flip you the bird. There are lots of idiots driving in NM and some of them are white folks but mostly people just don't seem to ask for trouble on the roads. The streets are a mixing board and you cannot tell where someone is from and what there predisposition to using a vulgar display of force might be. Which is to say if you honk your horn at every person that acts like an ass on the streets sooner or later you will attract the attention of someone who is seriously having a bad day and now they have someone to blame it on: you.  This is not true in Wisconsin/Madison. Lots of self righteous white folks here looking for trouble which is typical for people who have never really found it.  It is not something you go looking for. I think in general folks in Albuquerque have enough REAL trouble and on some level they know better. 

Generally what I have described about the human culture of Albuquerque is true for the food and the ... topography and climate of New Mexico. The food is interesting and spicy and not bland with many different contributing influences. It won't get you killed but it might make you turn bright red. The landscape and climate is extreme and this was my favorite part. I loved disappearing into the 'wild' and having to manage energy, water, food, daylight, temperature and judgment to keep from getting killed or hurt. It wasn't safe; like most things that are VERY challenging and VERY interesting. I felt alive and beautiful out in the desert, I felt a sense of place and appropriate size: which means that I felt really small, not without any meaning or importance but I had left the world that humankind has created and the sense that we are the most important thing in it. This was and is predominantly the feeling and the phenomenon about being outside 'in it'that keeps me feeling alive gives me sense that I fit in to the world.  : be it paddling big water in a sea kayak or riding a mountain bike in the desert 20 feet from a 200 foot dropoff or skiing up a mountain and then down: your skills and your brain and your experience are the safety net. Sometimes you have to just grit it out and the ability to do that comes from doing it.  New Mexico is hard in the way that Wisconsin is soft, soft like someone who uses the AC in their car a lot and always finds the parking space closest to the entrance and drives to the store when it is a ten minute walk. Wisconsin is relatively flat and there is no 'wild' very close. Even if it is rural it is cultivated and tilled and rolled flat in neat, ordered rows and the only trees are between your land and mine or where the boggy spots are.

It feels like the entire city of Madison is one big, sprawled out mall: car dealerships, OfficeMax, nail salons, supermarkets etc. The worst neighborhoods aren't that bad the pretense that Madison is a 'cool, trendy, and happening' place is thick.  Don't get me wrong, if I had to live here (and in a way I do) I could be in a worse place but ... crazy as it sounds I would rather have to be in Milwaukee or Chicago because they are both places that unlike Madison require some experience and skills to survive and this makes them interesting, not always pleasant but too much even pleasantness and this kid starts to look for trouble.

Monday, October 3, 2011

A Project Too Far ... ?

After I finished the MAD New System install I decided to start installing some of the stuff that I bought right after I got the truck. Notably I had put off installing the Mallory Unilite distributor because I was unsure about wiring, ballast resistors and the like and wanted to wait until the New System was in.  It was classically anticlimactic and aside from having to find TDC (Top Dead Center) a few times it was almost too easy.  The new distributor dropped right in, after a little fiddling the truck started and I advanced the timing a bit and set it with the timing gun and then I replaced the copper core wires with carbon core wires as recommended in the Mallory Unilite instructions. The truck seemed to run just fine with copper core wires but ... what the hell. Yearwood Performance wanted $85 bucks for carbon wires, Napa wanted $16. Guess who got the business?

(an aside on Yearwood Performance and their equivalent in the auto industry: Yearwood sells all types of 'gofast' for cars and trucks, typically marketed for the V8 crowd they have all sorts of generally overpriced bits some of which are purely esthetic and some is good solid perfomance equipment.  The thing is ... you have to know what you want before you walk in there because 9 times out of 10 the guys working there don't know what the hell they are doing and are too proud to say 'I don't know, let me find out." I am no expert but more than once I have gone in and asked a question about a piece of equipment armed only with information that I have learned from a website or instructions I seem to know more about it than they do ... which is frustrating when I am trying to make up my mind about what to buy.  I have run special orders for an outdoor store and I devised my own system of keeping track of who ordered what, on what day and who to call THE DAY it came in, our store became known for special orders partially because I kept track of them in a way that the customer could be kept in the loop and knew who to talk to and was informed very quickly when their order arrived.  I didn't think it was that extraordinary as far as service goes but given my experience at Yearwood and their equivalents it WAS extraordinary service.

After I got the Unilite installed using the resistance wire that the truck was equipped with and a surge protector that plugged inline to prevent electrical surges from burning up the electric eye I didn't have anything else that HAD to happen before moving from Albuquerque to Madison, WI.. Of course I did have time to kill and too much free time is problematic for me and really bad when your two year old daughter is being kept from you by the vindictive ex so ... I decided to replace the solid mounted, belt driven fan with thermostatically controlled, shrouded Derale fans. I measured, I searched around (at Yearwood where I was laughably misinformed) and finally I found some fans that looked like they would be a close fit on Amazon.  The fans came and tried to place them in the space available and there was not enough room between the radiator and the bolts on the fan pulley.  At first I said the hell with it and got an RA (return authorization) from Amazon. Then I reconsidered and decided to move the radiator forward a couple of inches, which I did, which was a big ol' pain in the ass but I eventually succeeded ... but not without putting another hole in the engine side of the radiator which I fixed with solder just like the first hole.  Once I got the radiator in I had to mount the shroud and fans against the radiator in a way that would render it stable and removable if the need arose. This too was a pain in the ass, lots of fiddling and eyeballing. Then I had to wire it and bear in mind that this unit has two fans each of which draws 25 amps for a potential 50 amp draw which is considerable. Each fan has it's own relay so in the end there are quite a few wires that all need to be going the right place. Ultimately I wanted to have switches on the dash that contolled fan functions such that I could turn the fans off (for highway driving),or have them controlled by thermostats or have them both on regardless of temperature.  Sounds great right? Well let me tell you what a complete PITA getting all that to happen was ... Good grief.

Sunday, July 3, 2011

"New System" installed!! (finally, 15 months after I bought it)

So 15 months ago I bought MAD Enterprises 'New System' which is basically instructions, wiring and hardware to not only rewire the starting system, the ignition system, the charging system and the headlights but reconfigure it to minimize voltage drop (which causes the classicly dim headlights in these old vehicles).  I had the box and had read the instructions many times but never got up the gumption to dive in to the project because the truck would not run while it was being rewired.  I broke up with my girlfriend, got a job, found a place to live and am now in the middle of a typically awful legal battle over our child so I have had plenty of excuses NOT to do this project. However, about two months ago I just said fuck it.  "I will just take it a step at a time and see what happens."

Well it took me roughly 5 weeks working on Thursdays after I dropped Gracie at day care.  June in New Mexico is hot and dry and this year it is so dry that all the local forests have been closed due to risk of fire. So working on the truck on a gravel parking lot in the full NM sun was challenging.  I would work four hours and drink 3 liters of water just to keep from passing out. Over a year ago I wrote an entry titled 'Boogered Up Electrics' and took a picture of the kit laid out on the floor.  In short there are a lot of little pieces that need to be put together in by crimping, soldering and shrinking tubing over the joint.  I won't go on ad nauseum but even for someone that has lots of automotive experience (I don't) this might take an entire weekend if you didn't make any mistakes and had a nice shop. But in the end after a few 'redo's' and noodling about how to fix my goofs I got it done. When I started I did the starter rewire first and I did something wrong and couldn't get it to start when I had finished that piece of the project. I kept going: replacing the alternator with a more powerful 3 wire internally regulated unit and lots of other wiring, relays etc.All the while knowing that I still had to go back and figure out what I had done wrong wiring the starter. There was a great 'moment of truth' when I got in the truck and put the key in the ignition and crossed my fingers that I had not crossed any wires. At this point it had been weeks since the truck had run and life had been a little rocky so I really wanted it to work for more than just the obvious reasons.  So I turned the key and the motor turned over (a good sign) three times and Vroooom! I was sooooo excited!. This sort of performance improvement doesn't necessarily translate into torque or horsepower but I have noticed the following: Before when the truck was running at idle the headlights were dim and yellow and brightened up noticeably when engine rpm increased as did the gauge lights on the dash.  After the headlights are bright and white and do not get brighter with an increase in engine rpm. The gauges are bright and do not get brighter when the engine is revved up. The intent driving this project was to provide a solid electical system platform upon which to build with air conditioning or electric fans etc. It is clear that at first glance I have achieved this, checking output with a multimeter is the next step but the change is very noticeable. 

I had a typical Homer Simpson 'Doh!' moment the last day when I was just securing the wiring with electrical tape and zip ties.  The system worked and as advertised it had improved things in various ways. But I realised that I had wired in a redundant circuit charging the battery which was superflous so I was in the process of pulling the redundant wire out across the front of the radiator when I remembered that I had not disconnected the ground on the battery which meant that this positve wire I was removing could ground on any part of truck, I thought it moments before it was too late and I heard a loud 'POP' and heard a hissing liquid sound only to see a small stream of coolant jetting out of the front of the radiator.  OOPS.  In the end it was a good thing because I drained the radiator and treated it with radiator flush to clean out some of the calcification.  I repaired the hole with a soldering gun and solder and it has held up for a few days of summer driving so ... cross your fingers. 

Saturday, June 5, 2010

Reconsider ... ?

After having spoken with my friend Ally I feel a little differently about the role and responsibility of Midtown S&W mentioned in the last post.  Ally said that the responsibility for this should fall squarely on the shoulders of the parent/s that left their child unattended in a place where other adults had access to her.  I still think the gym should have a policy that no children should ever be left unsupervised in any part of the gym and the day care room etc. should be locked when there are no staff in it.  BUT I agree with Ally about the root of responsibility being in the parents not the gym.  The gym screwed up but not in a neglectful way in that they failed to provide supervision but in that they inadvertently provided an environment where this sort of thing could happen; a place where children get left basically unattended but there is a general feeling of safety. (in a gym, with lots of members/staff around etc).  Lesson learned.  I just hope that little girl gets what she needs from her parents and gets therapy and is the type of person (this most especially) that can recover and sort it out and move on to have healthy, happy romantic and sexual relationships when she grows up.

Friday, May 7, 2010

6 Year Old Molested at the Gym

WTF?  No shit.  Midtown Sports and Wellness (of which there are three in ABQ) is a big, well equipped gym near my home in ABQ.  They have day care (2 hour maximum) during the day and I took advantage this winter.  Gracie loves going and playing with the other kids and I get to blow off some steam and not turn into a lump of fat.  I stopped going a month ago cuz it warmed up enough that I can do things outside: my preference.  Yesterday my new friend Dan told that a six year old was molested/raped at Midtown S&W.

Usually I am pretty hard to bump out of groove.  Life is a winding road, just like the song says but this bumped me.  Dan's daughter, my daughter, lots of peoples daughters use the day care at MSW.  This happened when the day care room was not staffed but ... who fucking cares.  Unsupervised young kids at a gym while Mom or Dad are off working out?  Woman on the cleaning staff has a 20 year old son that is a member of the gym.  He spent a little time with the girl helping her get a video started and then went back and molested her: nasty details like holding his hand over her mouth and telling her he would hurt her if she yelled etc.  She left the room crying after he left and told staff what had happened.  Cops caught up with him and he freely admitted to having a problem 'touching little kids'.  WTF?

"Day Care".  Most day cares care for kids whose parents are not on site.  These day cares be licensed and inspected by a governing body.  MSW's day care is exempt because parents are still on site.  So the gym did not have any guidelines that they were required to follow and I think this is how this situation came about.  After gym day care staff has left people still bring in their kids (albeit older than my 17 month old daughter but still young) and let them hang out, watch videos, play with the toys and all of this is unsupervised.  I think adults know that the kids are doing this but noone is specifically dedicated to the task.

I googled it and found all sorts of hateful, vengeful chatter on various 'white power' and 'gun nut' sites.  Their focus was on the fact that this 20 year old was an illegal alien (and this of course explains why he did something so depraved and damaging to this girl).  I just don't get it ... the racist angle.  As though a US citizen would never do this sort of thing ... ?  Stupid people are everywhere I guess.  One guy on a 'white power' site went into grisly detail how he would torture and kill this illegal alien child molester: cutting off his fingers with tin snips etc.  WTF? How is that any different and somehow justifiable than molesting a six year old?  He had it all planned out in numbered steps.  Totally twisted.

Dan, the new friend that told me about the situation at MSW, started in about how what he would do if this happened to his daughter.  I told him I didn't want to hear it and explained that if you truly wanted to get away with killing someone having witnesses to your 'plan' before the crime was probably something you'd want to avoid.  I said "Don't tell anyone anything."  Silly really, but ... god forbid, you never know.

Here would be the appropriate spot to get on my 'irate, vengeful, soapbox' and detail my plan to rid the world of one more predator BUT : my official perspective on this is; I don't need to spend that amount of energy and focus on something so completely negative and poisonous.  The other side of the revenge coin would be love and healing for the injured child.  That's not going to happen if I am plotting a murder is it?

The world is a really fucked up place.  Shit like this sometimes intrudes into my tight, white, safe little world and while it is a distinctly scary reminder I appreciate it for what it is.  Most of the world is not safe and wonderful.  I think that in spite of this sort of heinous shit it is possible to raise kids without teaching them to be eternally afraid.  Nuf said.

Friday, April 16, 2010

MOAB




You have probably heard of Moab, Utah.  Most people have if they like the outdoors.  I heard about it about twenty years ago after my friends Jamie and Danielle went there for a trip.  So they rode the Slickrock Trail on Rigids (a bike with no suspension).  There was really no other choice in those days so it wasn't old school or hard core then but riding Moab today is a different story.  Full suspension is the only way to fly and you are considered hardcore if you ride it on a hardtail (bike with only front suspension).  Of course the distance you can cover on a nice XC (cross country) full suspension bike and the speed you can descend has increased since the old days.  Regardless of what you ride Moab is a punishing place and it does not suffer ill maintained equipment or stupid behavior.  Moab is also an almost ridiculously beautiful place that will boggle your mind the first time you see it.  Views so vast and wide and full of images of great power that you almost can't accept that it is real.  Thousand foot drops to distant valley floors in the midst of which great towers of red rock rise up and up and up with the Colorado River pushing through it's hard won canyon like a great majestic snake.  Difficult riding, punishing extended descents, remote (and therefore dangerous just for how far away from help you are) locations all make for serious fun.  No matter where you stop you are in for at least a decent view.  Sometimes you just gawk and wish you had wings.

I drove up with my next door neighbor and riding buddy Chris and upon arrival he realized that the allergies that had been plaguing him badly were really a nasty head cold.  He was awake coughing and sneezing the first night and ... so was I, not mine but his.  I know he felt pretty bad with the cold and pretty bad because here he was in riding nirvana with a brand new amazing full suspension bike and he was sick.  He rode the first day and showed considerable pluck but there was no hiding he was sick.  We shuttled up to Porcupine Rim and it was just great.  I tore it up on my Specialized Enduro which was basically built for this type of trail.  It was an epic ride down to the river from the rim.  The night following our first ride was worse then the first and Chris was in a major hurt.  He called his girlfriend in ABQ and she drove the 350 miles north to get him and then they drove home!  Wow.  I stayed on and rode for two more days and met some very nice folks from Fort Collins, Co. who were kind enough to invite me to dinner and ride with me the day following so the trip was very satisfying and I hope to return before we leave NM.

Job Done

I mentioned earlier that I had done 1/2 the job replacing the trailing arm bushings and painting  and cleaning up the rear brake drums. Well, I found the time and got it all done and let me tell you, it feels pretty darn good.  In fact, I had to pull the axles again after replacing the wheel bearings because like an idiot I reused the old oil seals (which were both all boogered up) and they both leaked quite a bit since the job. So, with a trip to Moab coming up I knew I had to replace the seals.  It went well, I got the axles pulled quickly and only had one brass pinion gear shim fall out which was easy putting back.


 The bitch was finding oil seals.  The whole reason I didn't have new seals was O'Reilly's carried the bearing but not the seal (which makes no sense) I went to Napa and they had to look all over the city and found 1 set and it took me over two hours just to find the part and get it home. I have to say that all auto parts stores are NOT created equal.  AutoZone is OK if you need something a retarded monkey could find. O'Reilly's is better but ... I still get the feeling that half the time it is just a job and they could care less. Napa seems to be focused on getting the parts you need and they job out to all sorts of automotive vendors who need better service and knowledge base then a store that primarily caters to the clueless auto enthusiast looking for a Betty Boop air freshener.  Once installed the oil seals seem to work fine and the brakes work as well as drum brakes work. I did drive to Moab and I had no problems whatsoever in 900 miles of driving.

Wednesday, March 31, 2010

Boogered Up Electrics




 The wiring in this truck is 46 years old.  46 years.  Wow.  I still can't get my head around it.  Well, to be clear, the thing I can't get my head around is that this truck runs at all.  Every time I look under the back end all I see is the loose end of another cut wire or the patented 'redneck splice' (the bare ends of two wires loosely twisted together and hanging on by a just a single strand). Another of my goals is to get the wiring replaced and updated and to do it right.  Wiring and electrical stuff is a challenge but I know that if I take my time and find good vendors I can make this truck work better than it did brand new.  Full wiring harness replacement from Chevy Duty is around $450.  In addition to this I found a really solid looking splicing technology that encases but joints in plastic for bomber, waterproof splices. I also found reference to a guy in SoCal that has developed a modification for many old vehicles that improves the performance of the ignition/charging system for not much money and after two months of calling (I even wrote a letter) I got Mark from MAD Electrical on the phone and ordered a 'New System' package.  Once I get all the pieces of the system I can start replacing it section by section.  

Trimmings and such.

MOST of the work I have done on the truck has been based on my entirely 'function first' perspective. My gal Erin operates from the other end of the spectrum and does things from an 'aesthetics first' perpective which makes for a nice looking house and some good arguments.  However,  I have added a few things to the truck that have some aesthetic value although in my mind they are there primarily for what they do.

Here you see what I call the 'eyelids' on the windows.  Goofy right? Well, as small as they are they actually do a good job keeping the sun out of your face and in New Mexico this is no small thing.  I don't want to tint the windows because there is something I just don't like about not being able to see who is in a vehicle.

The other aesthetic addition are the arm rests.  This truck came with only one sun visor and only one arm rest which was missing when I bought it.  Just the bunged up holes in the panel where it used to be mounted. In fact the holes aren't in the right place so I don't think the missing arm rest was stock either.  Base models were basic.  These arm rests are actually from the earlier Chevy truck series but they look OK so I put in 2 of them.  As it turns out there are special square holes in the interior panel to which these can attach putting the stress of pulling the door closed on the actual door and not just the access panel you can see here.  I took extra care to see that these stayed in place and didn't pull out or loosen or clang using foam dampeners and big washers and threadlocker.  We shall see if it holds but it feels pretty F-ing solid.

Cheap Pickup Bike Rack

I am a firm believer in spending the money on really good gear WHEN IT IS NECESSARY. That said I am always looking for ways to get that gear for less OR build that gear for WAY less.  I like to build stuff and have through the years built my own kayak and bike racks because Thule and Yakima while a good product have hoodwinked the public into thinking they have to spend LOTS of money on a rack.  This just isn't the case in spite of what they tell you at the store.

For instance: If you want to put 2 (just two) kayaks on the roof of your whatever the conventional way to do this is to purchase a base rack ($300) and then a individual saddle system for EACH boat ($100 EACH).  OK, now we are up to $500.  That is just frigging stupid.  All we need to do is carry the boats.  The whole point is to paddle the boats in wild, beautiful and exotic places, the rack is incidental for Pete's sake.  $500?  I bought a kayak stacker for $70 (this was at least 10 years ago) and built a rack using wood, aluminum angle, foam, rope, screws and what have you for a TOTAL of $100.  My rack would carry1- 6 boats and was DEAD solid.  I used some form of this type of rack with the SAME kayak stacker for over 10 years without a problem.  I carried boats thousands of miles from Vermont to Georgia and back, I carried a full rack for hundreds of miles.  White water boats, sea kayaks, lumber, whatever.  Don't believe the hype.  Build your own.

So the latest rack is for carrying bicycles in a pickup truck.  You can go the same route for bicycles and buy a Thule or Yakima base rack and individual attachments for each bike but much the same as kayak racks it is going to cost you.  So, years ago I worked at a wonderful little used bike shop in Burlington, Vermont called Planetary Cycles.  There they had boxes of used and old bike stuff collected through the ages and I built a bike from parts that I am still riding today.  I also found all sorts of giblets of future use (GOFU) one of which was a cheap aluminum high flange hub.  I always intended to build it into a wheel but look what I did instead.

The rest of the rack is pretty straightforward stuff: one board of reasonable strength (plywood is probably best) I used 1/2 inch plywood.  Some way to attach the fork to the board. Old hubs if you can find them or the standard fork mounting block which are readily available and NOT expensive ranging from $15 to $25 each.  Most bike racks on vehicles are fixed and this makes some sense for security etc.  However, this one I wanted to be able to use in any truck or SUV so I fixed some closed cell foam to the underside to prevent it from sliding around and it works great. I actually took it for a test drive with 1 bike (more bikes would be more stable) on the interstate at 55 mph, round corners quickly and city potholes: the board did not move and the rear wheel of the bike did not move.    There is no reason that the rack be bolted down assuming you are driving around in a normal manner.  I think I would NOT want the rack fixed if there were an accident or rollover. Total investment: $40  HA!!

Thursday, March 25, 2010

Biting Off More Than You Can Chew

The latest punch list for the truck went as follows: replace trailing arm bushings, de-rust and paint trailing arms, disassemble, inspect, clean and reassemble rear brake drums, replace rear wheel bearings.  I had five days two of which I hoped to do some monkey bike riding.  I have used the term 'snowballing' to refer to the phenomenon of a two day job exploding into a four day job.  This is typical of mechanical work but it is de rigueur for an old vehicle like this.  As it turns out I didn't finish the job having to leave the driver's side rear drum and trailing arm for later.  I did, however, get both wheel bearings replaced which took some doing.  I had to go to Harbor Freight and purchase a slide hammer which is a sort of reverse-hammer for pulling things out after they have been pounded in (like wheel bearings).  As tools go slide hammers fall into the 'blunt instrument' category which is to say that there is only a limited amount of finesse involved and what really gets the job done is pure brutish persistence.  In other words: there was a lot of grunting and swearing and general destruction of the bearings being removed.  I got new bearings in at last after two trips to the auto parts store but I had to reuse the old oil seals which were not in great condition.  So far no leaks so we shall see.
More detail than you need section:  To replace the wheel bearings in this old truck the two piece axle shafts must be removed.  To do this the center pin in the rear end must be removed which means that the rear end must be drained.  GOOD GRIEF.  When the center pin is out it is important to NOT spin either wheel as the pinion gears and brass shims will roll out of place.  I learned a lot about the rear end but what a pain in the butt.  I did eventually figure out how to put the pinion gears back in but it took me a while hunched over under the back end of the truck to get it right.  The next time I have to pull an axle I will be much faster.

Eventually I figured out that there was no way I was going to get the list done and get in some mountain bike riding.  I had to remind myself that all this work was intended to be something that I enjoy and working like an idiot toward a deadline would not accomplish this goal SO I just got the wheel bearings on both sides done and the rest would have to wait.  Oh for a garage!!  I dream.

Tuesday, January 26, 2010

Busted Knuckles


So now I have had the truck for ... 2 months, somehow it seems like longer.  I have puttered about and completed quite a few 'short jobs' such as
replacing mirrors,
installing new locks for both doors, glovebox and ignition that all have the same key,
new tubing for the driver's side defroster vent,
seatbelts,
new retention chains for tailgate,
retention bolt and cables for a child seat,
de-rusted and painted the inside rear view mirror,
new spark plug wires and coil,
attach diamond plate truck box behind the cab

etc.


I have also installed new shocks which I probably should have waited to do because if I drop the truck I have to replace the new shocks BUT the ride was so completely terrible that I had to do something, now the ride is well ... trucklike but comfy and firm, before it was sloppy, loose and downright dangerous.  So.  The rear shocks are air adjustable and come with pneumatic line that I ran right to the rear bumper so changing pressure is as easy as attaching a bike pump to the Shrader valve right on the bumper.


The big job was replacement of the wooden bed floor which my nephew from NJ and I started while he was visiting in December.  He got a case of the lonely's and left early (first girlfriend texting him constantly and he texting back made conversation a little distracted).  That job took maybe four to five full days.  If I had to do it again I could do it faster but the first time was the typical 'can of worms' that snowballed the completion time.  Painting in December when the temperature was in the 40-50's was a challenge and we had to cure it inside the house which was stinky but worked (Erin was not here).  I made some mistakes and the finish is functional but still attractive: yellow pine stained with Penofin deck stain x 2 coats with Rust-oleum forest green steel strips.  Lots of Loc-Tite and time spent lying on a cold concrete slab with a ratchet and I finally got it done.  Turns out that the bed was designed to be bolted to the truck frame with TEN grade 8 bolts.  When we got the bed apart there were FOUR loose bolts of unknown quality holding the bed to the frame, no wonder the rear was like spaghetti: between the blown shocks and the lack of any torsional resistance from the bed the back end was loosey goosey.  After I got the finished bed bolted to the frame with larger than necessary grade 8 hardware the ride was much improved BEFORE I replaced the shocks.

I have another week in March when Erin and Gracie are going to be away and I am trying to line up an appropriate project.  The thing is that while I have the time to do some of the other 'medium jobs' I am balking at the cost.  A disc brake conversion kit that includes drop spindles, rotors, various hardware, new dual chamber master cylinder and lines, drop shocks and springs, etc. for both front and rear is $1500!! OMFG.  This all has to happen but ... I think that I am going to wait as the suspension and brakes work just fine now.  I know next to nothing about bodywork and I don't like working with paints, solvents and fillers as they make me sick but there is lots of this that needs to happen.  I think the next 'medium job' will be to pull the seat and de-rust the interior of the cab, paint the floor, rewire the gas tank sender while I am under the step-sills and then install Hush-Mat everywhere I can reach and then new jute mat under a new floor mat.  The cab sounds like what it is: a metal box.  The dash is steel, the doors are undamped and sound like a big can when you shut them, lots of room for improvement and it won't cost me 2/3 what I paid for the truck to do it.  I know this is all riveting stuff.



Last bit; I have admit that I LOVE working on this old truck.  So far I haven't really done anything that involved but I don't have a garage either so ... I was kinda sucking wind this winter: really feeling low and bored and without purpose (Gracie is great and I am enjoying her gobs but you know what I mean ...) So tinkering with the truck is oddly very satisfying for me and between getting back into Olympic weightlifting in the gym and the truck I am feeling pretty good.  So the reward here is really a sense of bootstrapping myself out of a funk and the satisfaction that I did not make a mistake and buy a project that I have no interest in working on.  When I drove the truck back from Washington State I drove very deliberately at 45-55 mph for 1600 miles.  There is no radio, there is no clock, there is no keyed remote in fact the doors didn't lock, there are no gauges except for fuel and speedo and idiot lights, there is no cruise control, the seats do not adjust, there is no air conditioning, there is no windshield washer fluid: just wipers, there are sum total SIX knobs on the dash: headlights, wipers, choke, cigarette lighter, heater fan lever, defrost ducting lever, that is it.  My long winded point is that driving this thing is a very deliberate experience and in the words of my good friend Geoff "almost mindful."  The thing I really appreciate about driving this truck is that it isn't easy.  It is not hard either but it is not a turn key, velvet smooth, light shifting, vehicle.  The clutch isn't a hard push but it's not like shifting a Honda Accord with a standard either.  When the transmission is fully warmed up shifting from 3rd to 4th requires a even hand and sometimes double clutching.  When this truck was released in 1963 it was the most advanced design yet for Chevy.  It had independent front suspension, trailing arm rear suspension, coil springs instead of leaf springs, the fleetside longbed was only 4 years old as an option, the bed on this truck is HUGE.  BUT~! Compared to todays pickup trucks this truck is a dinosaur.  Like I said 'It isn't easy" It makes you pay attention, think about what you are doing, I feel involved when I am driving this truck.  I have to think ahead and plan my strategy (especially in Albuquerque traffic).  I cannot afford to daydream, drift into that state of distracted, on the phone while eating gummi bears and listening to music consciousness that half the world seems to attain while driving.  I know this doesn't make sense to many (including my sweety Erin) but modern, everyday cars are too easy, we take them for granted, we take the responsibility of driving them for granted, we treat driving like a right not a privilege. We are warm and safe inside a hermetically sealed bubble of temperature and humidity controlled splendor smiling and shiny behind our crush zone and air bags atop a heated seat that adjusts in six directions and saves our personal setting.  Don't get me wrong, the art of conveyance has reached an almost ludicrously refined state here in the USA.  I am here to tell you that somehow I have missed the point.  I HATE new cars.


 I owned two Honda Elements and I have no pithy criticism, they are exceedingly well designed, well manufactured cars with excellent resale value. I bought them knowing what I wanted and I got it and then some. I hated them. I have no logical reason.  But will some one spend months looking for just the right used Honda Element 46 years from now?  I think not.

Tuesday, December 1, 2009

98844 to 87106



Novermber 7th, 2009 I flew to Spokane WA, where Vivane Harper of Oroville WA picked me up at the airport.  Viviane was sweet as pie, short with very old knees making it difficult for her to walk easily.  Viviane is the the truck's previous owner's ex wife and she was in Spokane visiting grandkids and going on a blind date.  We had a great time on our 3 hour ride back to Oroville during which Viviane entertained me with theories of Earth's eroding magnetosphere and the impending stop of earth's rotation as a result.  She also had some very interesting things say about rocks from outer space and lots of other stuff that made more sense to me than magnetospheres and space rocks. On our way back to Oroville we drove past the Grand Coulee Dam and through a forest fire on both sides of the road.  I am assuming that is was a controlled burn but one never knows.  Very smokey and odd.

Left is a picture of me sitting in the truck for the first time which Viviane very sweetly took after dropping me off. You can almost tell from my expression that I am gleeful 'Ha ha ha! Finally.' Oroville WA is where I finally met the truck.  I tried to get it shipped via car carrier but it was so far off the beaten path that noone wanted to take the job.  Two truckers did and then canceled once they figured out where it was.  It was pretty frustrating seeing I bought it in September and did not get to see it until November 7th.  So here I am sitting in it for the first time hoping it starts: it did.  Very interesting driving it for the first time.  This is just what I expected and NOT your Subaru Legacy with a standard.  It grunts and wheezes, snorts and whistles, farts and groans but it is a pretty simple machine and in spite of all the noise it is very satisying to drive.  The seat is not stock and was reputedly installed so seatbelts could retrofitted to the cab.  When I asked Bob if it had seatbelts he said it did.  Well he wasn't lying but they were under the seat and in the bed in respective heaps.  Later my sister and I tried to mount them and discovered why they had not been installed; fairly major modification of the cab would be required to mount the shoulder belt.  I threw them away and ordered lap belts.  Someday the seat will go too.


Oroville is US terminus of the Okanagan River Valley.  Any further north and you are in Canada.  Nice little town but I think it is much like many 'edge' towns in the US.  Key West, El Paso, all of Alaska etc., places that are as far as you can go and still be in the US.  They seem to collect a certain type of 'almost expatriot' who generally wants to be left alone and resents government, rules, taxes and the like.

So, I stayed the night with Bob: the previous owner and discovered that less is more when it comes to quality time with Bob.  What a disagreeable man.  Smokes too much, drinks too much and complains vociferously.  After 12 hours most of which was spent asleep in his basement I had had enough.  I was ready to head south to warmer weather and friendlier faces.

So let it be known that I took some pictures on this trip but I did not stop and take pictures every time I 'should' have.  I gaped at some amazing views and just kept right on driving.  It is also easy to understand why I took so many pictures that include the truck.  I just got it after waiting two month, so sue me.  So, to make up for the ... gaps in my pictures I have used a great resource and website called Panoramio.  I found pictures of almost every place that I had been to support my pictures on this horrid little chronicle.  Bear in mind that I drove from WA to NM in November so any picture that looks out of season probably IS and good on you for catching it. Also all of these pictures can be scrutinized by clicking on the photo and then zooming additionally if you really want to see details.

Finally headed south!  97 South to Riverside where I stopped at Home Depot and bought some 'old truck road trip' essentials: tools, lubricants, gas can, etc. The kind of stuff that you hope you don't need but you know what they say about chance favoring the prepared. At first I was driving alongside the Okanago River which like all other rivers in this area empties into the Columbia River.  To the right is Orondo WA. and I was graced with good weather and good health and kept driving south.
To the left is Brewster WA which as you can plainly see is a beautiful place.  In fact the whole area is incredible.  Along the way I got to see why most big chain supermarket apples  are from Washington State. Orchards are everywhere.


We have orchards in Vermont and New York and New Hampshire but not this many.  The landscape is much starker, bigger and magnificent than Back East. The scale is orders larger.  Nothing beats the east for GREEN but the brush used to paint this country was HUGE.
Have you ever had to work inside a small room, a room that feels close? Remember the feeling of leaving that room and walking outside into a bright, clear day with a high blue sky? That expansive, open, empty feeling.  An overhead camera focused on the hat on your head zooming back and back and back until you disappear into the combination of colors and hues that comprise this huge land.  There just aren't that many people per square mile in this part of the country and most of them like it that way. It is a good feeling being out in the middle of the great, wide, open.

When you have just adjusted to the scale of things.  When the Okanaga River Valley is beginning to feel homey you come to the Columbia River Valley and you have to start all over.  There is no fording this river.  The Columbia is absolutely HUGE.  There is nothing in the East like this, nothing.  Wow.

Perhaps you begin to see why I didn't stop to take pictures. It felt like a hopeless attempt at capturing what it was like.  Like eating Taco Bell and thinking that now, at last, you have had good Mexican food.  Think again.  What I remember most about the Columbia is this deeply quiet essence of power.

After a few hours of driving through this sort of ridiculous grandeur, this majesty on steroids I started to get a little complacent about it.  No more exclamations or slowing down, no more wonder and awe. 'Yeah, nice river, I need a Coke!'  My normally well stocked box of 'Ooohs and Aaaahs' was down to the occasional 'hrrrmph'.  I had a lactic acid burn in my exclamator muscle.  Enough, already.
To the left is the Martha Inn.  Strange name for an Inn?  Perhaps but not so strange if it is located in George WA. Too funny.  Free wooden choppers at the restaurant.   (not funny, sorry)

All the while I am learning to drive this old thing and keeping my fingers crossed that chance WILL actually favor the prepared today.  The truck starts every time, shifts fine, stops fine, the only thing that I really had to watch was the suspension and that is just plain old worn out.  Nothing wrong with it that wouldn't hold until NM.  Somewhere along the way the rear right hub cap has spun off into never never land but the it is just a cover and these wheels are looking a bit rough anyway.  Not the first or second thing on my list but they will eventually be replaced.

Southern Washington state flattens out and I talk to my friend Richard in Portland Oregon trying to arrange a rendezvous.  We make a plan and then he texts me that he totally forgot he has jury duty.  Hmm. Sure.  I keep going and by days end it is dark and I am bushed and I look for a good place to pull off and sleep a few hours.  I find a good place in the future site of a housing development that is just dirt road.  Windy, cold and starry I curl up in the voluminous bed and get some sleep.
Oregon beckons and I am very near I84 southeast to Boise.  Almost immediately the road climbs off the Oregon plain and up into the mountains.  Speed limit on the interstate was 35mph due to the tight radius curves.  'Snow chains required in storms' states the sign.  I cross my fingers and keep the boiler stoked.  What a crazy road! It winds down into a tight, winding canyon with dirt exits to both defunct and operating mines.  The only way in or out is on the road.  You would need climbing gear to ascend the steep walls.


I drive and the country opens up and flattens out and feels emptier than Washington did. Logging trucks and old, abandoned farmhouses dot the countryside. I stop for breakfast in North Powder, Oregon and have biscuits and gravy.  A more substantial gut bomb I have never eaten. White flour biscuits under a veritable sea of more white sausage gravy that was more white than sausage.  I couldn't finish and thought I would never need to eat again.  I think I heard a seat spring let go when I hauled my ass back into the truck seat.  



Thursday, November 26, 2009

Getting Started



Well, the truck is here.  I plan to write a section on YouMeandGPLB (I changed the name of the blog BTW) on the trip from Oroville Wa. to Albuquerque NM but this one will be short and sweet.  I have ordered a bunch of stuff for the truck: new wood for the bed, hardware to install it, seatbelts, gas tank, locking gas cap, etc.  I have also been poking around in and around the truck trying to prioritize what I should work on first.  The usual kind of stuff for a vehicle that runs but basically needs lots of love.

Saturday, September 26, 2009

Imitation is the finest form of admiration.



So I have gone and done it.  What you say?  What?  I have stepped off the cliff.  I have 'thrown caution to the wind', I have damned the torpedoes, I have resisted the urge to be 'reasonable', I have ignored advice to be practical.  I have done something that always elicited the response from me 'That is too cool, I want to do that someday' when someone ELSE did it.  Now I have done it. What have I done?  After all that it ought to be good eh?  

I bought a 1963 C10 Fleetside Longbed 3/4 ton pickup truck with a 4-speed SM 420 tranmission and a straight six 292 cubic inch motor.  (what a mouthful)

The only follower of this silly blog: Charlie Whitney bought a Triumph Spitfire a while ago.  When he did I remember thinking just what mentioned thinking 'That is too cool, I want to do that someday.'  Since then I have lost track of the project but regardless I am sure it still fits into 'cool', after all it is Charlie.  

Well, sportscars and motorcycles ... get me in trouble.  I am sticking to mountain bikes and sea kayaks for the full gonzo 'full throttle' behavior that tends to get me in trouble.  My longtime erstwhile friend Lynn Coates had a truck much like this one in the 1980's when I was twenty-something and I loved that truck.  It was black and white and she towed a matching black and white horse trailer to all the Events that she competed in and we all tagged along on motorcycles to applaud, support and travel New England.  Since then I have developed the opinion that all the new American built trucks are just silly.  They are outrageously expensive, all the 4WD models are about a foot too high off the tarmac and they have all lost the honest work ethic design that made the pickup truck what it isn't today.  Why do I need a full size pickup that is ostensibly meant for work to have a bed so high that the manufacturer offers as an option a step and handrail on the tailgate just to get in the bed?  Why?  I will tell you why; Because most pickups are no longer really utility vehicles anymore.  They are marketed and purchased as lifestyle accoutrements.  Pickups these days are like bodybuilders.  Big and muscular and totally focused on looking like they are strong and hard working.  Except the focus has moved from hard work and getting the job done to LOOKING the part.  In a word: Posers.  I am not saying that everyone that buys a truck these days is a poser and that pickup trucks aren't any good for work.  They aren't all posers driving posers.  BUT most of the pickups on the road are daily drivers for guys that don't WORK for a living.  They could get along just as well with a conservative sedan for the use they give the truck.  Like I said: accoutrement.  Put another way: penis extension.  A reflection of what a MAN should drive.  "The Heartbeat of America", "Built Ford Tough", Dodge Ram "Big Horn Edition".  Current day pickup trucks are like cartoons.  

So why did I buy one?  Well ... here is the thing.  I am a guy, an American guy.  I am a lot of other things too including iconoclastic, contrary and independent to a fault.  I love pickup trucks but I can't stand pretense and the new trucks and most of the people who drive them are full of pretense.  Old pickup trucks were heavy, slow and low and they were not a socially popular vehicle to drive, they were an essential on farms and many other places but no one drove one that didn't need one.  They were too hick.  Things changed and more and more people worked jobs that were not physical.  In fact the real money was in a job where you didn't 'work'.  After a few generations chasing the American Dream and realizing that it wasn't a Dream the popular mind of the populous began to romanticize the ethos of the pickup truck.  That is when the shift from truly mundane bucolic utility vehicle to chest thumping, musclebound poser vehicle began.  I had a pickup truck: a nice 1996 Ford Ranger.  That was a great truck.  Nothing fancy, got the job done.  I used it for what it was good for: moving big stuff from here to there.  I used it a lot.  I felt justified in owning it because I used it where no other type of vehicle would do.  Well, I sold that vehicle, I wish I hadn't but I did.  

Now I drive a Honda Element.  I call it my Manivan.  Practical?  Sure.  Like you read about.  But it lacks something.  As cool as it is it is low on ... vehicular soul.  Not as low as a minivan but low. It does everything I want it to do.  Why then?  Why?  

I can't sit on the hood.  Shit I can't even lean on it.  I plowed into a snowbank in my first Element and the pressure on the front end pushed the hood up just the tiniest little bit in one place.  Well I thought I might be able to just push it back, so I put my thumb on the spot and pushed down ... much to my dismay I dimpled the hood right where I pushed with my thumb.  The metal in the hood is so thin that it will permanently deflect from the pressure of a thumb.  For Pete's Sake!!  I can sit on the hood of the C10, all 225 pounds of me without effect.  

Why? I like bench seats.  Pickup trucks are not available with bench seats anymore.  The best you can do is what is called a 60/40 split seat.  I don't like bucket seats.  Mostly because the size of my 'bucket' is not the size of your bucket and I invariably feel a bit cramped in the 'one size fits all' bucket seats of today.  I like that the old school bench seats weren't sculpted or shaped to fit tops and bottoms.  They were flat and smooth and went all the way across.  You could sit right next to someone or ... not.  

Why? The bed floor is nice and low.  Pickup trucks are thusly named for their utility in ... (stay with me now) picking things up.  Which is to say that their ostensible primary purpose was to facilitate putting things large and small in the back.  You know this, I know this.  The higher the bed floor is from the ground (that you and I are standing on) the more difficult it is to put something in the truck.  Imagine that you are carrying something heavy: a transmission.  If you were strong enough to carry a transmission all on your lonesome you would certainly be doing it with straight arms using the larger stronger muscles in your back to do the work.  So putting the transmission in the bed of a truck might be possible if the bed was roughly at the height of your hands with arms at your sides.  Next time you are near a current Ford, Chevy, GMC or Dodge full size truck check the height of the bed.  Dollars to donuts it is not at hand level.  My new 'old' truck has a nice low bed.  

Why?  (this is the last one I promise)  I like the way it looks.  There are some pretty bold looking new trucks: like the Dodge Ram but they all look like they are trying too hard.  Like bodybuilders.  Actually I like the look of many of the older trucks but my favorite is the '60-66', first generation C10 (actually it is the second generation as Chevy made the first generation for one year: 1960)  

So in the spirit of my friend Charlie: an inspirational person, I have begun the journey.  Thanks Charlie.  

The first step is to get the truck here.  It is 1500 miles north in Oroville WA.  I will keep you posted.